Updated
Climate reporting map: what the organisation files, and why the supplier has to be invited
Scope 3 sits inside the Greenhouse Gas Protocol. The Science Based Targets initiative’s Forest, Land and Agriculture (FLAG) target is set on top of the Protocol’s land accounting. Category 1 does not fill itself: suppliers join when you invite them.
You are the reporting entity. The sustainability report is yours. The suppliers behind your purchased goods are not filers, and they will not open an account to find you.
This is the map of what the file has to carry, and the operating fact underneath it. The value-chain lines become a share only after you invite the supplier.
The Greenhouse Gas Protocol, then the Australian filing
The Greenhouse Gas (GHG) Protocol is the accounting family. Scope 3 sits inside it. FLAG does not: FLAG (Forest, Land and Agriculture) is a Science Based Targets initiative (SBTi) target, and the inventory under that target is still a GHG Protocol inventory.
Corporate Standard. Scope 1 is what you burn or leak on sites you own or control. Scope 2 is purchased electricity, steam, heat, and cooling. Scope 3 is every other indirect emission in the value chain. You pick one organisational boundary — equity share, financial control, or operational control — and you keep it. Offsets stay outside the totals. Biogenic carbon dioxide is reported on its own.
Scope 3 Standard. This is also a GHG Protocol standard, the Corporate Value Chain (Scope 3) Accounting and Reporting Standard (2011). It sorts the value chain the Corporate Standard already called Scope 3 into 15 categories. A conforming inventory reports each category in tonnes of CO2 equivalent, says what was left out and why, and says how much of the figure came from suppliers rather than an industry average.
Land Sector and Removals Standard. This is the GHG Protocol’s standard for land emissions and CO2 removals, including land-use change, land management, removals stored in land and geologic carbon pools, and emissions from biogenic products and from products derived from technological removals. It takes effect on 1 January 2027 for companies seeking to conform. Emissions and removals are reported separately. It is not an SBTi standard. For FLAG target-setting, SBTi's FLAG Guidance page says companies may use either the 2022 draft land-sector guidance or the published Standard for emissions accounting until the Standard becomes effective on 1 January 2027. A FLAG target remains an SBTi target set on a GHG Protocol land inventory, not a GHG Protocol rule in its own right.
FLAG. The SBTi Forest, Land and Agriculture Guidance (version 1.2, March 2026) is the target a company sets on that land inventory, if it chooses SBTi validation. It is not a GHG Protocol standard, and it is not an Australian statute. A portfolio Category 1 estimate is not farm-level FLAG data.
Australia. Chapter 2M of the Corporations Act decides who prepares a sustainability report. The content of that report is the Australian Accounting Standards Board’s climate standard, AASB S2, and AASB S2 points back to the GHG Protocol for how emissions are measured, including the 15 Scope 3 categories. The National Greenhouse and Energy Reporting (NGER) scheme and the Safeguard Mechanism are separate returns. They collect Scope 1, Scope 2, and energy. They do not collect Scope 3.
Supplier Share sits under those rules. It holds the supplier’s share and the export. It does not write the sustainability report, and it is not your assurer.
Who files in Australia
You prepare a sustainability report if you already prepare a financial report under Chapter 2M and you meet a size test, an NGER test, or an assets test. ASIC Regulatory Guide 280 sets out the three groups.
| Group | First period begins | Size test, two of three | Also in this group |
|---|---|---|---|
| Group 1 | 1 January 2025 | $500 million revenue, $1 billion assets, or 500 employees | NGER controlling corporations whose group meets the corporate NGER threshold |
| Group 2 | 1 July 2026 | $200 million revenue, $500 million assets, or 250 employees | Other NGER-registered corporations; schemes and super funds with assets of $5 billion or more |
| Group 3 | 1 July 2027 | $50 million revenue, $25 million assets, or 100 employees | Schemes and super funds that meet this smaller test |
In the first year an entity applies AASB S2, it may omit Scope 3 (paragraph C4(b)). From the second reporting year, Scope 3 is in the statement.
As at 12 November 2026 the calendar looks like this. A Group 1 entity on a calendar year is in that second year for the period that began on 1 January 2026, and the package is generally lodged in 2027. A Group 1 entity with a 30 June year end is still inside the first-year relief for the year ended 30 June 2026. The year that began on 1 July 2026 is when that entity discloses Scope 3. Group 2 periods that began on 1 July 2026 are first-year periods. Group 3 starts with periods beginning on or after 1 July 2027.
The 2026-27 Budget announced a plan to raise the thresholds that decide whether a proprietary company is "large", to $100 million consolidated revenue and $50 million consolidated gross assets (from $50 million and $25 million). Treasury's August 2026 consultation paper says this would relieve smaller Group 3 entities from mandatory sustainability reporting. On 19 October 2026 Treasury released draft regulations for consultation; the consultation closed on 2 November 2026, and if the regulations are made the new thresholds would apply to financial years commencing on or after 1 July 2027. As at 12 November 2026, ASIC says the proposed changes are not yet in effect and the existing thresholds continue to apply. Check the current thresholds before relying on the Group 3 row.
Scope 2 in the statement is the location-based total. Renewable contracts are described beside it when they help a reader understand that total. They do not replace it.
Where a law requires the NGER measurement method for part of the entity, that method covers that part only. It does not remove Scope 3.
NGER itself is a different filing. A facility reports at 25,000 tonnes of CO2 equivalent, or 100 terajoules of energy. A corporate group reports at 50,000 tonnes, or 200 terajoules. The Safeguard Mechanism applies to facilities above 100,000 tonnes of Scope 1. Baselines decline 4.9% a year through 30 June 2030. Many food organisations will have an AASB S2 report and no Safeguard facility. Keep the returns separate.
Under the Auditing and Assurance Standards Board’s ASSA 5010, assurance in the first reporting year is limited. It covers Scope 1, Scope 2, governance, and the description of climate risks and opportunities. Scope 3 sits outside that first assurance scope. Later years widen.
What else the statement carries
Governance: who oversees climate, and what management does with it.
Strategy: the risks and opportunities, what they mean for the business, the transition plan, and a resilience assessment. ASIC’s guidance is to use at least two scenarios referable to the temperature outcomes in the Climate Change Act 2022.
Risk management: how climate risk is found, judged, and run with the rest of the risk process.
Other metrics: assets or activities exposed to transition risk, to physical risk, and to climate-related opportunities; capital deployed toward climate; any internal carbon price; the share of executive pay linked to climate.
Targets you have set, and targets the law imposes, including a Safeguard baseline where you have one. For a greenhouse-gas target, name the gases, the scopes, whether it is gross or net, and any planned use of carbon credits. A net target is published with the gross target beside it.
The fifteen Scope 3 categories
You consider all fifteen. You disclose which ones are in the total. A category inside the minimum boundary can be left out only with a reason. For a food or retail organisation, category 1 is almost always the line that matters.
| # | Category | Where it usually sits in a food inventory |
|---|---|---|
| 1 | Purchased goods and services | Cradle-to-gate emissions of ingredients, packaging, and services bought in the year. Farm, commodity, and land-use change usually sit here. |
| 2 | Capital goods | Cradle-to-gate emissions of plant and equipment bought in the year. |
| 3 | Fuel- and energy-related activities | Upstream emissions of fuels and electricity, plus transmission losses. Combustion stays in Scope 1. Generation of purchased electricity stays in Scope 2. |
| 4 | Upstream transport and distribution | Freight you pay for, in vehicles you do not own. |
| 5 | Waste generated in operations | Treatment of your operational waste by someone else. These are expected emissions from waste created this year. |
| 6 | Business travel | Employee travel in vehicles you do not own. |
| 7 | Employee commuting | Travel from home to work. Usually an estimate. |
| 8 | Upstream leased assets | Operation of assets you lease, where those emissions are not already in Scope 1 or 2. |
| 9 | Downstream transport and distribution | Freight and storage after the goods leave you, when the customer pays. |
| 10 | Processing of sold products | A customer’s processing of an intermediate product you sold. A finished-goods brand often excludes this, and records why. |
| 11 | Use of sold products | Direct use-phase over the life of what you sold. Most food has none. Fuels and refrigerants do. |
| 12 | End-of-life of sold products | Disposal of products and packaging sold this year. Expected future emissions. |
| 13 | Downstream leased assets | Assets you own and lease out, where those emissions are not in your Scope 1 or 2. |
| 14 | Franchises | Franchisee operations that are not already in your Scope 1 or 2. |
| 15 | Investments | Investees that are not already in Scope 1 or 2. Under paragraph 29A of the compiled December 2025 text, which applies to annual periods beginning on or after 1 January 2027 (earlier application is permitted), this may be limited to financed emissions, if the limit is explained. |
For each category the inventory names the total, what is included, what is excluded and why, the activity data and the factors, the method and any allocation, and the share calculated from supplier or partner data. Biogenic CO2 sits outside the category total.
AASB S2 uses the same category list. It also asks how far the Scope 3 total uses data from specific activities in the value chain, and how far that data is verified. AASB S2 asks the reporting entity to prioritise its Scope 3 inputs using four characteristics, listed in no particular order: data based on direct measurement, data from specific value-chain activities, timely data that represents the jurisdiction and technology involved, and verified data (paragraph B40). All else being equal, direct measurement comes before estimation (paragraph B43) and primary data before secondary data (paragraph B47). Secondary data and industry averages remain available: paragraphs B46 to B49 allow Scope 3 measurement to use primary data, secondary data or a combination, and the Standard presumes Scope 3 can be estimated reliably using secondary data and industry averages (paragraph B57). The entity must disclose how far its Scope 3 emissions are measured using inputs from specific value-chain activities and how far those inputs are verified (paragraph B56).
Forest, land and agriculture targets, when the land lines are material
Set a FLAG target if the company is in a designated sector — forest and paper, agricultural production, animal-source food, food and beverage processing, food and staples retailing, or tobacco — or if gross FLAG emissions are 20% or more of Scopes 1, 2, and 3. Removals are excluded from that 20% test. Land-use change is included.
The target covers at least 95% of FLAG Scope 1 and 67% of FLAG Scope 3. Those two tests stand apart from the energy and industry target. When gross Scope 3 is 40% or more of Scopes 1–3, the energy and industry Scope 3 target has its own 67% as well.
The inventory under the target includes land-use change (direct or statistical — not both stacked as if they were different emissions), land management out to the farm gate or the forest yard, and removals. Emissions and removals are reported separately. Removals do not shrink the reductions the target still requires.
A no-deforestation commitment is part of setting the target. The cutoff date is expected to be 2020 or earlier and, where 2020 is not feasible, no later than three years before the company’s first FLAG targets are submitted for validation. Companies setting FLAG targets for the first time have up to two years after that submission to eliminate deforestation, with an absolute deadline of 31 December 2030 for submissions after 2028. The commodities to assess are cattle, cocoa, coffee, oil palm, rubber, soy, and timber, including feed embedded in animal products. A commodity is in the commitment when it is at least 1% of sourced FLAG volume.
The numbers in that inventory are GHG Protocol land-sector accounting, as set out above. FLAG adds the target boundary, the coverage tests, and the no-deforestation commitment.
None of this enrols the farm or the mid-tier plant as an SBTi member. It tells the company with the target what can honestly sit in the FLAG column. An anonymised intensity can support a portfolio estimate. It is not farm-level land-management data. Supplier Share shows a buyer the name of each supplier that shares with it, with the shared figures once the buyer has accepted the share and the year is paid; there is no anonymous option. An organisation further up the chain can also see a supplier's name and shared figures if it opens that tier with its own available seats. The supplier-side version of that distinction is in You are not an AASB S2 filer.
Averages can start the file. They cannot finish the supplier lines.
AASB S2 presumes Scope 3 can be estimated with secondary data. A factor set can produce a first number. It cannot say which buyer a supplier chose to share a result with, at what allocation, or whether the supplier has withdrawn the share.
Companies on a FLAG path are expected to move past industry averages on the land lines over time. A buyer is usually better placed to explain a figure that the supplier had calculated for a named commodity and financial year, and chose to share, than an industry average. Whether a figure is suitable for assurance is for your assurer; a Supplier Share result is not assurance evidence. If a buyer removes a supplier, the supplier can withdraw its share of the ended result, which stops any further export of it; copies already downloaded stay as they were.
That figure does not appear because a portal exists. Suppliers do not browse Supplier Share looking for buyers. There is no public catalogue. A supplier uses the platform when a buying organisation invites them.
What you do
- Request buyer access. Confirm the work email. We confirm that you represent the organisation, then quote. An admin approves or rejects the request. After approval, an admin marks a financial year paid for a seat count.
- Invite the suppliers on the purchased-goods lines that matter, for that paid year, while a seat is available. A waiting invitation holds a seat. Start with the FLAG commodities, then the rest of category 1. An invite links them to your network. It does not move any numbers.
- They choose which buyers receive each result. The same result can go to more than one buyer. Sharing a result does not require a licence. How sharing works is on How it works.
- Keep Scope 1, Scope 2, any NGER return, and the sustainability report in your own file. Export the shared lines into that working paper. The export is an input. It is not the statement.
If you are a supplier who was sent this page, you are not the filer unless your own company meets the tests above. The buyer’s report is their duty. Your spreadsheet is a commercial ask.
Bottom line
The GHG Protocol is the method: the Corporate Standard for the three scopes, the Scope 3 Standard for the 15 categories, and the Land Sector and Removals Standard for land emissions and removals. FLAG is the SBTi target a company may set on that land inventory. AASB S2 is the Australian statement, and it measures emissions with the Protocol. Category 1 is where your suppliers sit inside that statement. They share it when you invite them.
Collecting supplier results for your own Scope 3 measurement? See how access, year licences and sharing work.