Updated
Greenhouse Gas Protocol land-sector rules take effect on 1 January 2027 for companies seeking to conform
The Protocol’s Land Sector and Removals Standard, and its companion Guidance on agricultural land use and emerging carbon dioxide removal technologies, become effective on 1 January 2027 for companies seeking to conform. Companies seeking to conform with those documents should treat reports published in 2028 that present 2027 emissions data as the first inventories that need to comply. Buyers measuring land-use change, land management and removals should keep those figures separate, not netted into one intensity. This is not a general legal mandate, and it is not an automatic Australian or target-program commencement date.
On 1 January 2027 the Greenhouse Gas Protocol’s Land Sector and Removals Standard and its companion Guidance take effect for companies seeking to conform with those documents. As at 9 November 2026, that effective date was just under eight weeks away. The Protocol’s 16 July 2026 launch webinar said that, for companies the Standard applies to, greenhouse-gas reports published in 2028 that present 2027 emissions data need to comply in order to be in conformance.
This is an accounting rulebook, not an Australian statute and not a general legal mandate. It sits underneath the corporate and value-chain standards that many buyers already use, including buyers who later put a value-chain total — what the Protocol calls Scope 3 — into an Australian climate statement.
What version 1 covers, and what is still open
The Standard’s first version was published on 30 January 2026. The Guidance — Version 1.0, covering agriculture and carbon dioxide removal technologies — followed on 30 June 2026, with version 1.1 of the Standard after what the Protocol describes as minor, non-substantive edits. Both documents list 1 January 2027 as the effective date. Version 1 of the Standard and Guidance applies to agriculture and carbon dioxide removal technologies. It does not apply to forestry, and does not provide comprehensive requirements for companies that own or control forest land or are in forest product value chains. Version 1 still requires accounting for biomass carbon stock changes on productive agricultural lands (for example agroforestry and silvopasture), land-use-change emissions from the conversion of natural forests to plantation forests, and land-management production emissions due to activities on forest lands. Future versions may include comprehensive forestry requirements. Alongside the Guidance, the Protocol opened a request for information on forest carbon accounting, with comments invited until 1 February 2027.
Within its agricultural scope, the Standard sets out how companies account for and report land management and land-use change; carbon dioxide removals stored in land and in geologic carbon pools; and emissions from biogenic products, and from products derived from technological removals, across the value chain. The Guidance is the “how”: worked examples, equations and calculation detail, written as a supplement to the Corporate Standard and the Corporate Value Chain (Scope 3) Standard.
Keep the pieces separate
The part that changes the conversation at the farm gate is not a new single number. It is a request not to squash several different things into one.
The Guidance requires companies that apply it to account for and report emissions and removals separately by accounting subcategory. They cannot use net emission factors that combine emissions and removals for Scope 3 accounting and reporting. When a company collects or shares factor data with supply-chain partners, it has to keep emission factors and removal factors apart, and it has to distinguish the land-emissions subcategories.
The Guidance gives the practical picture. A retailer using secondary life-cycle factors would need factors that can distinguish land-use-change emissions, land-management production emissions, and land-management net biogenic carbon dioxide emissions for the products it buys. A food processor with traceability to the farms it sources from “would need to request separate data on each ‘land emissions’ subcategory and data on removals associated with the crops it purchases.”
That is a more specific ask than “what is your intensity this season?”. Land cleared in one year, methane and nitrous oxide from production, net biogenic carbon dioxide from soils and biomass, and any removals the supplier is in a position to report are not interchangeable lines. Mixing them into a single netted figure makes the inventory harder to defend and, for a company seeking to conform with this Standard, non-conforming.
Removals themselves are not automatic. The Guidance organises removal accounting in a separate part, for companies that choose to report carbon dioxide removals. A buyer asking for a removal figure is asking for something the Standard treats as an elective disclosure with its own rules, not for a balancing item subtracted from production emissions on the way through.
How this meets Australian climate reporting
The Australian Accounting Standards Board (AASB) climate standard, AASB S2 Climate-related Disclosures, points reporting entities to the Greenhouse Gas Protocol for how greenhouse-gas emissions are measured, including Scope 3. The Land Sector and Removals documents are supplements to that family, not an Australian accounting standard, and 1 January 2027 is not an AASB commencement date. Whether a particular Australian reporting entity applies the new supplement is a question for that entity, its advisers, and any later guidance from the AASB or the Australian Securities and Investments Commission.
The Protocol’s webinar adds another caveat: programs that build on its standards set their own effective dates. A voluntary target program — including a Forest, Land and Agriculture target under the Science Based Targets initiative — may align on a different calendar. Ask which rulebook the request is written against before treating every land-sector question as an AASB S2 line.
What to check on an existing result
If you already prepare a farm or facility result for a buyer, the useful check is whether that result can be read in parts. Can you see land-use change separately from production emissions? If a removal is included, is it labelled as a removal rather than buried in a net intensity? Method, version, boundary and financial year should travel with the figure.
If a new template asks for those splits, the buyer may be preparing for a 2027 inventory rather than inventing a private method. It is fair to ask whether they are applying the Land Sector and Removals Standard, another Greenhouse Gas Protocol document, a target-setting program or an Australian climate statement — and for which year.
Version 1 will not answer every land question that arrives. Version 1 does not apply to forestry, subject to the limited forest-related requirements set out above. Forest carbon accounting is also the subject of the request for information already described. Companies recalculating a base year for years before 2027 are told, in the July webinar, that they should apply the Standard’s requirements to that base year or period if their own base-year policy requires a recalculation. That is the buyer’s inventory decision, not a request that a supplier rewrite earlier seasons without being told why.
This briefing is general information for people in agricultural supply chains. It is not legal, accounting or assurance advice, and it is not a claim that any particular inventory will conform with the Standard. Check the primary documents, and your own advisers, for how they apply to you.
Collecting supplier results for your own Scope 3 measurement? See how access, year licences and sharing work.