When a buyer with a 30 June year-end first needs your Scope 3 numbers
For a buyer in the second group of mandatory climate reporters, with a 30 June year-end, the first reporting period began on 1 July 2026. That first period can omit Scope 3. Scope 3 first has to appear in the period that starts on 1 July 2027.
A buyer with a 30 June year-end, in the second group of entities that must prepare a climate statement under Australian law, is already inside their first reporting period. That period began on 1 July 2026. In that first year they may omit Scope 3 greenhouse gas emissions from the statement. The first period in which Scope 3 has to appear starts on 1 July 2027.
This is a calendar for suppliers. It is not a new filing duty for you. The sustainability report remains the buyer’s duty, as You may not be a mandatory climate reporter and Scope 3 is already a supplier question set out. The wider map of who files is in Climate reporting map. This piece extends those Group 1 briefings to the second group, for a 30 June year-end.
This is not legal, accounting or assurance advice. The dates below are as at 16 November 2026.
Who this buyer is
Under Chapter 2M of the Corporations Act 2001 (Cth), an entity prepares a sustainability report if it must prepare a financial report under that Chapter and it meets a sustainability reporting threshold in section 292A. Who is brought in, and when, is set by section 1707B.
The Australian Securities and Investments Commission (ASIC) Regulatory Guide 280 calls the second cohort Group 2. Table 2, which cites section 1707B, says Group 2 starts with annual reporting periods commencing on or from 1 July 2026 to 30 June 2027. In the Act, that window is the “second transitional period” defined in section 1707: it starts on 1 July 2026 and ends on 30 June 2027. For a financial year that commences in that period, section 292A applies if the entity meets one of the tests in section 296B(2), (4) or (5):
- at least two of: consolidated revenue of $200 million or more; consolidated gross assets of $500 million or more; or 250 or more employees
- it is a registered corporation under the National Greenhouse and Energy Reporting Act 2007, or is required to apply to be registered, for that year
- it is a registered scheme, registrable superannuation entity or retail corporate collective investment vehicle, and the value of its assets (with any entities it controls) is $5 billion or more
A 30 June year-end entity that meets those tests has a first Group 2 period that starts on 1 July 2026 and ends on 30 June 2027. A calendar-year Group 2 entity’s first period would start on 1 January 2027, which also falls inside the same window. Whether an entity meets those tests is worked out at the end of the financial year, so a buyer may only know for certain on 30 June 2027 that the year starting 1 July 2026 was its first Group 2 year (RG 280.34). This briefing stays with 30 June.
A separate Treasury proposal would raise the thresholds that decide whether a proprietary company is “large” and would apply from financial years commencing on or after 1 July 2027. The Treasurer released draft regulations on 19 October 2026; consultation closed on 2 November 2026. As at 16 November 2026, ASIC says the proposed changes are not yet in effect. They are not law, and they do not change the Group 2 tests set out above.
The first period, and the Scope 3 relief
The content of the climate statements comes from the Australian Accounting Standards Board Climate-related Disclosures standard (AASB S2). Appendix C deals with transition.
Paragraph C2 says the date of initial application is the beginning of the annual reporting period in which an entity first applies the Standard. For a Group 2 buyer that has not applied it earlier, that date is 1 July 2026.
Paragraph C4 then permits one or both of two reliefs in that first annual reporting period. Paragraph C4(b) is the Scope 3 relief: the entity “is not required to disclose its Scope 3 greenhouse gas emissions”. ASIC puts the same point in RG 280.107, citing paragraphs C3 and C4(b).
That relief appears in the Standard as first made in September 2024 and in the compiled December 2025 text. The December 2025 amendments, which include a change to the financed-emissions cross-references in C4(b), apply to annual reporting periods beginning on or after 1 January 2027, with earlier application permitted (paragraph C1B). For a first period that began on 1 July 2026, the September 2024 text is the starting point unless the entity applies the amendments early. Either way, the entity is not required to disclose Scope 3 in that first period.
Paragraph C3 also says the entity is not required to disclose comparative information in that first period. If it uses the C4(b) relief, paragraph C5 permits it to keep using that relief when it presents comparative information in later periods. That is about the comparative column, not about postponing Scope 3 in the second year itself.
None of this stops a buyer asking you for numbers during that first period. They may want them for a voluntary disclosure, a customer programme, or a later pack. The relief is about what the statement must contain, not about what a contract can ask for.
When Scope 3 first has to appear
From the second annual reporting period in which the entity applies AASB S2, the C4(b) relief no longer applies to the current period. For a 30 June year-end Group 2 buyer, that second period starts on 1 July 2027 and ends on 30 June 2028. That is the first period for which Scope 3 has to appear in the climate statements.
The sustainability report must be lodged with ASIC under section 319(3): within three months after the end of the financial year for a disclosing entity, registered scheme or registrable superannuation entity, and within four months for other reporting entities. For a year ended 30 June 2028, that is 30 September 2028 or 31 October 2028, depending on the entity. The buyer may ask you well before then, while the pack is being prepared. A first-year report, for the year ended 30 June 2027, follows the same three- or four-month timetable in 2027, and may omit Scope 3.
Limited immunity under the Act does not move that calendar. Section 1707D says that, except for a criminal action or an action brought by ASIC, no action, suit or proceeding lies against a person in relation to a “protected statement”. A statement about Scope 3 greenhouse gas emissions is a protected statement if it is made in a sustainability report, for a financial year commencing during the three years starting on the “start date”, for the purpose of complying with a sustainability standard (section 1707D(3)). Section 1707 defines the start date. ASIC Regulatory Guide 280, Table 3, which cites sections 1707C(1) and 1707D(3)–(4), treats the Scope 3 window as reports prepared for financial years commencing between 1 January 2025 and 31 December 2027. A year commencing on 1 July 2027 sits inside that window. A year commencing on 1 July 2028 does not. The settings apply to statements in the buyer’s report, and the auditor’s report on it, in the circumstances the Act sets out. They are not a supplier exemption, and they do not defer the second-year Scope 3 disclosure.
As at 16 November 2026, the Australian Accounting Standards Board lists meeting 224 for 26 November 2026, with no agenda, board papers, Action Alert or minutes posted. This calendar does not rely on any later Board paper.
What a supplier can sensibly do, and when
You are usually answering a commercial ask in service of someone else’s report, not becoming a filer: see You may not be a mandatory climate reporter. Confirm that, and then work to the buyer’s actual period.
In the buyer’s first period — already running, to 30 June 2027 — there is no need to rush a new calculation because a first-year statement can omit Scope 3. If you already have a figure that covers the product, site and period they buy from you, keep the method and the version next to it, with the period it covers. That record is useful if the same figure is asked for again, including as a comparative, or when Scope 3 is in the second-year statement.
From 1 July 2027, that buyer is in the first period that has to include Scope 3. Expect the asks to become more specific as they prepare that pack, still as a commercial request, not as a parallel filing by you. A factor or an estimate can still be used in the buyer’s measurement. AASB S2 allows a reporting entity to measure Scope 3 using primary data, secondary data or both (paragraphs B46 to B49), and asks it to prioritise inputs using the characteristics listed in paragraph B40, so it does not require every line to be a supplier-specific primary figure, as Scope 3 is already a supplier question explains.
If you do share a figure, share the one you already have, with its method, version and period on the face of it, and keep a copy of what you shared.
Bottom line
For a Group 2 buyer with a 30 June year-end, the first reporting period began on 1 July 2026 and can omit Scope 3. Scope 3 first has to appear in the period that starts on 1 July 2027, in the statement for the year ending 30 June 2028. The supplier question stays commercial. Keep the method and the version next to every figure, and do not rush a new calculation for a first-year pack that the Standard allows the buyer to prepare without Scope 3.
Asked for your emissions figures? Suppliers join Supplier Share by invitation from a buying organisation. Supplier Share does not calculate or verify a result, and a shared figure is not an assurance opinion or a certification. Read the page for suppliers.